Gas Furnace Repair Problems Solutions
Gas furnace repair uses either propane or natural gas to heat enclosed living areas. While gas is often talked about as an expensive means of heat, gas furnaces typically burn cleaner than oil furnaces and therefore present their owners with less repairs than oil furnaces.
But when problems do occur with gas furnace repair, they are typically easy to identify and are not labor intensive to correct. Below are some issues that commonly arise with older gas furnaces and what we can expect them to repair.
If our gas furnace repair produces no heat, chances are that it is experiencing one of the following issues: a blown fuse, closed control valve, tripped circuit, a non working pilot light and faulty thermostat.While we could correct these problems gas furnace repair by ourselves, it is best to call a gas furnace repair service as example a heating and cooling company if we are not experienced with gas furnaces.
Regardless of which of the above issues our gas furnace repair is experiencing, an HVAC repair technician should be able to fix the problem on the same day, and none of the above issues will result in a significant repair cost. If our gas furnace repair has been producing less heat, it could be because the blower is occluded, the blower belt is loose or because the filter or burner is dirty. These problems can also occur in unison.
As with a gas furnace repair that produces no heat, a furnace that produces insufficient heat resulting from one of the above issues can usually be fixed on the same day at minimal cost. If a gas furnaces repair technician indicates that the problem stems from one of the above issues but that some of the other issues appear immanent, save money and have all of them repaired in one visit.
If our gas furnace repair switches on and then switches off before producing the desired level of heat, it likely suffers from one of the following problems: a dirty filter, a clogged blower and an overly dry motor.In the first case of our gas furnace repair, a technician will clean out the blower and its surrounding area using a vacuum; in the second case, the technician will replace our temporary air filter or clean and reinsert the permanent air filter and in the third case, the technician will lubricate the motor by placing oil in the necessary oil ports. In each case, the service cost should again be minimal.
With most gas furnace repair, we can tell if a pilot light is on by kneeling to the floor and looking at the underside of the furnace, where we can see a small blue flame emanating from a small pipe if the pilot light is running. A pilot light on the gas furnace repair that will not light is generally caused by one of three issues: a clogged pilot opening, insufficient gas flow due to an improperly set gas valve and a damaged thermocouple. In each case, the remedy is requires light labor and can be fixed at minimal cost.
